- Outline And Dimensions
- Notice
- Safety Precautions
- Installation Diagram
- Installation Of The Indoor Unit
- Electrical Wiring Connection
Before installing the air conditioner unit, please read the following safety precautions carefully.
•
Installation and maintenance should be performed by qualified persons who are familiar with local code and
regulation, and experienced with this type of appliance.
•
All field wiring must be installed in accordance with the national wiring regulation.
•
Ensure that the rated voltage of the unit corresponds to that of the name plate before commencing wiring work
according to the wiring diagram.
•
The unit must be GROUNDED to prevent possible hazards due to insulation failure.
•
All electrical wiring must not touch the water piping or any moving parts of the fan motors.
•
Confirm that the unit has been switched OFF before installing or servicing the unit.
DO NOT INSTALL OR USE THE AIR CONDITIONER UNIT IN A LAUNDRY ROOM.
Please take note of the following important points when installing.
• Ensure that the drainage piping is connected properly.
If the drainage piping is not connected properly, it may cause water leakage which will dampen the
furniture.
• Ensure that the units panel is closed after service or installation.
Unsecured panels will cause the unit to operate noisily.
CONTENTS
page i-ii
- Indicator Lights
page iii-vi
- Air Conditioner Unit Operation
page 2
- Operating Range
page 3
- Optional : Electrostatic Filter
page 3
- Service And Maintenance
page 4
- TroubleShooting
SAFETY PRECAUTIONS
! Warning
IMPORTANT
! Caution
1-2
page 5
page 6
page 6
page 7
page 8
page 8