Publicidad
Idiomas disponibles
Idiomas disponibles
Quick Start Guide
For detail description, please refer to the user manual
Main unit
Li-ion battery x 2 (installed in the unit)
●
●
Include
USB cable
●
●
CD-ROM: USB driver, Remote software, User manual
●
Functions
DC jack
Supplies power with the
provided AC adaptor
Starts a measurement
Start
Stops a measurement
Stop
Power/Home button
Turns the power ON/OFF
To return to the Main screen in operation
General setting
Opens the menus to set the unit, calendar, data, sound,
language and to display instrument information
Measurement setting
Opens the menu to set the mode, alarm, save, remote
and temperature/humidity
Preset
Opens the menu to set or select up to 18 Presets
For USA and EMEA
Kanomax USA, Inc.
219 US Hwy 206, Andover, NJ 07821 U.S.A.
Handheld Particle Counter Model 3888 and 3889
Inlet protective cap
●
AC adapter
●
Inlet protective cap
Remove cap while the unit is operating
Inlet
2.83L/min suction volume
Outer diameter 6.4mm
USB port
(for PC)
Connects with your PC by using
the USB cable
USB port
(for Printer & USB memory)
Connects with the printer by using the USB cable
Allows you to copy the measurement
results to the USB memory
Change chart types
Switches the chart types:
Bar → Circle → Table ∑
Threaded tripod mount
Attaches instrument to the tripod
Note:
Please do not cover or insert anything into
the threaded exhaust port on back of the instrument
History
Views the historical data or measurements
Error
Tap the Error key to display an error description
Cumulative Σ
Opens the Cumulative ∑ display on the Main screen
TEL: 1-800-247-8887 (USA) / 1-973-786-6386
E-mail: sales@kanomax-usa.com
URL: www.kanomax-usa.com
01001/17.07
Purging
Prior to using the instrument in a clean environment such as cleanrooms, it is recommended to purge the
Zero filter
Tubing
Measurement
1
Select measurement mode
Measurement modes
Repeat
Single
Performs a measurement of set sampling time only once
Continuous
Continues a measurement until pressing the Stop button
Calculation
Calculates the average, standard deviation, maximum, and minimum after measurements
ISO
Performs measurements in accordance with ISO 14644
GB
Performs measurements in accordance with Chinese National Standard
General Setting
Unit
readings displayed on the Main screen and Measurement results.
Calendar
Set the date and time
Data
entire measured data
For Japan and Asia
Kanomax Japan, Inc.
2-1 Shimizu Suita-shi, Osaka 565-0805 Japan
1
Make sure
2
Turn the power on and press the Start button.
Perform a continuous measurement for approximately
15 minutes until the measuring count value is suitable
for 10 seconds or more.
3
2
Set up location
and sampling time
Input with
ten keyboard
1
1
0
Location
Sets measurement locations by number
Ranges: from 1 to 99
Sampling time
Sets the sampling time of 1 cycle
Ranges: from 6 sec to 99 min 59 sec
Select
on the Main screen to set the unit, calendar, data, language, and sound
Language
Selects a language from English, Japanese, Chinese, Spanish
Sound
Sets the operation sound ON/OFF
Information
Displays the instrument information
TEL: +81-6-6877-0183
E-mail: sales@kanomax.co.jp
URL: www.kanomax.co.jp
3
Start measurement
②
①
①
Go to main screen by
pressing Home button
②
Press start button to start
measurement
* Measurement starts after
10 seconds warm up time
Publicidad
