MD SPORTS WSP200_047G Instrucciones De Armado página 4

X 1
1
Target
Note: Unscrew the top cap of the air valve as shown in
diagram FIG. 1.
Insert the Electric air pump and start inflating the target.
It's a one way valve that prevents airflow from inside
even if the Electric air pump is removed.
Once the target is inflated with sufficient air inside, lock
the top cap by screwing it tightly.
WSP200_047G
BIG SKY 2-PERSON FLOATING ISLAND
WITH BUILT IN COOLER
ASSEMBLY INSTRUCTIONS
FIG. 1
Inflation (Target)
DO NOT OVER
INFLATE
Top cap
Bottom cap
Cover nozzles
CAUTION:
• Inflation using an air pump (Not included) must be performed
by an adult.
• Do not use a high pressure pump or a pump for car tire.
• The maximum air pressure for the Inflatable Target is 2.0 kPa.
• Check before each use and at regular intervals.
MODEL : WSP200_047G
Electric air pump
(not included)
4
Diameter 90 inch
Top cap
www.themdsports.com