Altrad Limex OPTIMIX 120 LP Instrucciones De Uso página 17

1
4
Procedure to make concrete or mortar
1. Pour in water and base material (gravel, sand).
2. Add the binding agent (cement, lye).
3. Repeat steps 1 and 2 until you reach the required quantity.
4. Mix the materials until you reach a homogenous mix.
Consult a professional to check the exact quantities of base material, binding
agent and water that are necessary to obtain a mix of quality.
The mixer is not intended for road transport. Just do the same with proper Vehicle.
According to the site can be moved manually or by crane. Before transporting or
moving the mixer to position as it is the top view.
2
3
Disconnect the power cord before transporting or
Preparation for transport or replacing
Pull the lever mechanism to unlock the drum in
a vertical position.
By turning the lever seize a position mixing
(concrete or mortar).
POSITIONS ON THE ADJUSTING DISC
1. Mortar
2. concrete
3. emptying - cleaning
4. transport
TRANSPORT
moving
GB
Figure 1
16