AKASO FOCUS Mini Guia De Inicio Rapido página 5

POWER BANK MODE AND CHARGING METHOD
1. When the projector is in power bank mode/
projection mode, the projector can charge other
devices via USB port.
2. In order to improve charging efficiency, please
charge the projector with the original power
adapter in power bank mode.
3. The number of indicators represent remaining
capacity of battery.
a. When the 4 indicators are all on and without
flashing, the capacity of battery is full.
b. When there is only one indicator on, the
projector is in low power status and can be
used as power bank for emergency.
c. If there is only one indicator flashing, it means all the power is used up and
the projector needs to be charged.
EZWIRE: SCREEN-SHARING VIA WIRE CONNECTION
iOS Device:
1. Select and click EZWire icon in the main projector interface.
2. Connect the projector and iOS device with USB cable.
3. The iOS device will pop up a prompt, as shown in the figure below "Step 3".
Select "trust" and then wait a moment, the screen content on the iOS device will
be displayed on the projector screen.
3
EZWire
Step 1
1
Step 2