Publicidad
4.a Auto Pairing Method
:After pressing «pair» button
on the application, remove
the insulating plastic tab to
send out the pairing signal
orremove and reinstall the
battery.
Verifying the Setup :
Press the «Disarm» button
the gateway will beep once indicating
the system has been disarmed.
Press the ' A rm' button
the gateway will beep longer.
4.b Manual Pairing
Method :
After pressing «pair» button
on the application, press
and hold the «Camera»
button located in the front
of the Remote Key until the
blue LED
EN
Publicidad
