Publicidad
Belle LTE
Instruction Guide
Plug the mPERS charging cradle
1
into a power outlet. Make sure that
the outlet is NOT operated by a
light switch or a power strip. A red
light on the cradle will light up.
Enchufe el cargador mPERS base en una
toma de corriente. Asegúrese de que el
tomacorriente NO sea operado por un
interruptor de luz o una toma corriente
multiple. Se encenderá una luz roja en
la parte de atrás del cargador.
Place the mPERS pendant into the
2
charging cradle. The red battery
light will flash as the unit charges.
The red light on the unit will be
solid when fully charged.
Coloque el colgante mPERS en el cargador.
La luz roja de la batería parpadeará cuando
el dispositivo este cargando. La luz
roja del dispositivo permanecerá fija
cuando esté completamente cargada.
Wait 3 minutes until the device goes
3
into idle mode before wearing. Once
on rest mode press and hold your
help button until the blue call light
comes on indicating your call to
The Care Center is in progress.
Espere 3 minutos hasta que el dispositivo
entre en modo inactivo antes de usarlo. Una
vez en el modo de descanso, mantenga
presionado el botón de ayuda hasta que se
encienda la luz azul de llamada, lo que indica
que su llamada al Centro de Cuidado está
en curso.
The Care Center will talk to you
4
through your unit. Let us know you
are a new client testing your device!
El Centro de Cuidado se comunicará con
usted a través de su dispositivo. ¡Háganos
saber que es un cliente nuevo probando su
dispositivo!
"No thank you.
"This is the
I'm a new client
Care Center. Do
testing my unit."
you need help?"
The blue call light will flash for 5 minutes
after a call has ended.
La Luz de llamada azul parpadeara durante
5 minutos después de que finalice
una llamada.
It is important to
test your device
monthly
to ensure device is working
properly. Before you test your unit,
make sure it is completely charged.
Belle LTE devices are
water-resistant
and can even be worn in the shower.
To ensure proper charging, please clean
the metal contacts on the back of
your button and inside your charging
cradle with a soft cloth every
If you have any questions or are in need
of assistance, do not hesitate to call us
at 1-800-860-4230.
Belle LTE Light Guide
Guía de luz del Belle LTE
Charging (on charging cradle)
Cargando (en la base de carga)
Blinking
Needs to be Charged (off
Parpadeando
charging cradle)
Necesita cargarse (fuera de la base
de carga)
Fully Charged (on charging cradle)
Solid
Charging (on charging cradle)
Completamente cargado (en la
Fija
base de carga)
Fully Charged (on charging cradle)
Flashing 1 second - out of service
Flashing 5 seconds - normal
Blinking
Parpadeando cada 5 segundos
Parpadeando
después de una llamada, o
Charging (on charging cradle)
mientras carga es normal
Call is in progress
Solid
Fully Charged (on charging cradle)
La llamada está en curso
Fija
After 5 minutes of inactivity
After being removed from the
Off/Sleep
cradle for 3 minutes
Después de 5 minutos de
Apagado
inactividad.
3-4
weeks.
Publicidad
