3.2 Menu Tree
Refer to the below table for details on menu items and available menu options.
Menu option
Resolution
Loop recording
EV
Motion Detection
Audio
Date Stamp
G-sensor
Button Sound
Set Date/Time
Auto power off
Language
Light Frequency
Screen Saver
Image rotation
Format
Default Setting
Firmware version
Description
Set the desired video resolution.
1 Minute to 3 Minute
+5/3, +4/3, +1.0, +2/3, +1/3, +0.0,
-1/3, -2/3, -1.0, -4/3, -5/3, -2.0
Enable/Disable the motion detection. If this
function is enabled and the power off
button is pressed, the system alert
message. Under motion detection mode,
the device will automatically start
recording when any object movement is
detected.
Recording with audio
Recording with date
Adjust G-sensor sensitivity
Button Key Sound
Set the date/time
Automatically power off after start
Set up language
Adjust
light frequency
Set up
Screen Saver
Rotate screen image
Format the memory card. Warning: Once a
format has been initiated, ALL content on
the micro SD card will be deleted CANNOT
be restored or recovered.
Reset all options to the factory default
settings.
Showing firmware version
Available option
1080 HD 1920*1080
1080P 1440*1080
720P 1280*720
WVGA, VGA, QVGA
Off/1 Minute, 2Minute or 3 Minute
On/Off
On/Off
On/Off
Off/2G/4G/8G
OFF/NO
Press
value, press the O K button to
switch
the field and confirm.
Off/1 minutes/3 minutes
English, French, Spanish, Portuguese,
Deutsch, Italian, Simplified Chinese,
Traditional Chinese, Russia, Japanese
50Hz/60Hz
Off/3 Minute, 5 Minute or 10Minute
Off /On
OK/Cancel
OK/Cancel
14
▲/▼
button to adjust the