Publicidad
Safety
Signs, symbols and instructions placed on this product must never be covered or removed and must
remain present and clearly legible throughout the entire lifetime of the product. Immediately replace or
repair illegible or damaged signs, symbols and instructions. Contact your local dealer for instructions.
Caregiver
Read all of the instructions carefully before use and keep them for future reference. Incor-
rect use of this product may cause serious injury to the user
Always use the correct lifting techniques and aids for this purpose
Never leave the user unattended in this product. Ensure permanent supervision by an
adult
Repair/replacements must only be made using new original R82 spare parts and fittings
and carried out in accordance with the guidelines and service intervals prescribed by the
supplier
If there is any doubt as to the continued safe use of your R82 product or if any parts should
fail, stop using the product immediately and contact your local dealer as soon as possible
When the user is moved in the product from one room to another or to an outdoor area in
case of an emergency, please ensure that the area is flat and without any obstacles
Environment
For the purpose of safety and comfort, always move the product away from the sun and
allow to cool before use
Use this product on a level surface without any obstacles. Be aware of reduced maneuver-
ability on slippery surface
User
If the user is close to the max. load limit and/or has a lot of involuntary movements, e.g.
rocking, a larger size with a higher max. load or a different R82 product should be consid-
ered
Product
Carry out all positional adjustments on the product and accessories and ensure that all
knobs, screws and buckles are securely fastened before use. Keep all tools out of the reach
of children
Activate the brakes before placing the user into the product
Always activate the security locks on the height adjustment and angling pedals once the
desired postion is found
Adjust the frame height before placing a heavy user (50-70 kg)
Ensure the stability of the product is maintained before placing the user in it
We recommend you notify the user before angling the seat and back
Before moving the chair, with or without an user seated, please ensure the seat is in hori-
zontal position, the back in vertical position. Do not move an angled seat
Ensure the castors are fully-functional and secure before use
Inspect the product and all of its accessories and replace any worn out parts before use
Do not expose the gas spring to pressure or high temperatures
Do not expose the piston rod to scratches etc. It is important to use a cloth or the like, if
tools are used to adjust the gas spring
Be careful not to get your fingers trapped, when placing the product over the toilet
support.R82.org
ENGLISH
19
EN
Publicidad
