SAFETY CONDITIONS IMPORTANT INSTRUCTIONS ON SAFETY OF USE
PLEASE READ CAREFULLY AND KEEP FOR FUTURE REFERENCE
The warranty conditions are different, if the device is used for commercial purpose.
1. Before using the device, read the instruction manual and follow the instructions
contained in it. The manufacturer is not liable for damages caused by using the device
contrary to its intended purpose or improper operation.
2. The device is for home use only. Do not use for other purposes that are not for its
intended purpose.
3. The device is powered by a USB socket with DC 5 V / 1 A.
4. Use extreme caution when using the device when children are nearby. Do not allow
children to play with the device, do not allow children or people unfamiliar with the device
to use it.
5. WARNING: This equipment may be used by children over 8 years of age and people
with reduced physical, sensory or mental ability, or people who have no experience or
knowledge of the equipment, if this is done under the supervision of a person responsible
for their safety or have been granted them information on the safe use of the device and
are aware of the dangers of using it. Children should not play with the equipment. Cleaning
and maintenance of the device should not be performed by children, unless they are over 8
years old and these activities are carried out under supervision.
6. Do not repair the device yourself, as it may cause electric shock. Take the damaged
device to an appropriate service center for checking or repair. All repairs may only be
carried out by authorized service points. Incorrectly performed repairs can cause serious
danger for the user.
7. The appliance should be placed on a cool, even surface, away from heating kitchen
appliances such as: electric stove, gas burner, etc.
8. Do not use the device near flammable materials.
9. Do not use near water or in humid rooms.
10. Do not use near flammable substances.
11. Do not spray the device with any chemical substances.
12. Do not insert any objects into the lamp.
13. Do not cover the device - it may cause a fire.
14. The device should be regularly cleaned of dead insects.
DEVICE DESCRIPTION
1. On / off switch
3. Fan
5. Detachable insect tray
A. Type A USB plug for connection to a laptop / phone charger
B. Type B MICRO USB plug to connect to the device
PRINCIPLE OF OPERATION
The device must be connected to a power source with a USB DC 5V / 1A port at all times.
The device attracts insects with LED light (2) with a UV wavelength of 395nm, the fan (3) sucks insects to inside of the device, then dries
(dehydrates) in the container (4), causing insects to die. The ensnared insects that are still alive attract the opposite sex of their species
with pheromones, attracting more insects. The method of use is important for performance. Turn on the device before turning on the light
or suddenly turn off all strong lights for 10-20 minutes. Use the device away from places strongly exposed to UV rays and fluorescent
lamps, as well as away from children who can reach it. Do not put your hands into the device or carry it while it is running to avoid finger
injury from the fan or other accident.
USING
1. Place the device on a flat surface inside the room in the desired place. The recommended location is 0.8-1.2 meters high, away from
front doors or windows, away from intense light sources and draft.
2. Use a USB cable to connect with the device - (B) and a USB socket with DC 5 V / 1A - (A).
3. Turn the device on using the switch (1).
4. Do not turn off the power so that the fan (3) rotates until you are sure that entrapped insects have been dried and neutralized.
5. Turn off the device using the switch (1).
CLEANING AND MAINTENANCE
1. Turn off the device and allow it to cool before cleaning or maintenance.
2. Do not use chemical cleaning agents for cleaning.
3. Regularly clean the insect container (4) by unscrewing the insect tray (5) clockwise. After emptying the container, reassemble the tray.
4. Make sure the device is dry before switching it on again.
ENGLISH
2. LED UV light source
4. Insect container
3