Tabla de contenido
Publicidad
Troubleshooting
problem
possible causes
Vacuum
battery isn't fully charged
won't turn on
brush roll is jammed
brush roll
not turning
brush roll needs to be reset
broken brush roll belt
Dirt container is full
Dirt container is not installed
properly
Vacuum
cleaner
Foot is loose
has low
suction
Filters need cleaning
Filters need replacing
Dirt container is full of debris
Visible dirt
Filter is missing or installed
escaping from
incorrectly
cleaner
Dirt container installed incorrectly
please do
not return
this product
to the store.
Other maintenance or service not included in the manual should be
performed by an authorized service representative.
Thank you for selecting a bissell product.
for any questions or concerns, bISSEll is happy to
be of service. contact us directly at 1-800-237-7691.
WaRnInG
To reduce the risk of electric shock, turn power switch off
and disconnect polarized plug from electrical outlet before
performing maintenance or troubleshooting checks.
Remedies
Charge battery. Follow charging
battery instructions on page 5
Remove obstruction.
Follow instructions on page 7
Follow instructions on page 7
Follow instructions on page 8
empty dirt container
Position container correctly and
snap firmly into place
Make sure foot is fully inserted into
body of unit
Follow filter instructions on page 7
Visit www.bissell.com or call 1-800-
237-7691 to order replacement filters
empty dirt container
Check filter for correct installation
Position container correctly and
snap firmly into place
www.bissell.com
800.237.7691
9
Publicidad
Tabla de contenido
