IVS AVD748BD Manual Del Usuario página 23

5.3 SYSTEM
5.3.1 TOOLS
TOOLS
SYSTEM INFO
BACKUP DATA (USB)
BACKUP DATA (DVD)
BACKUP LOG (USB)
EXIT
1) LANGUAGE
Select the language of the OSD.
2) ADMIN PASSWORD
Click "SETUP" to change the administrator password. The default administrator password is 0000.
When you're prompted to enter the DVR password, enter the administrator password, and
on the status bar of the screen and all operations are allowed.
3) OPERATOR PASSWORD
Click "SETUP" to set or change the operator password. .
When you're prompted to enter the DVR password, enter the operator password, and
the status bar of the screen and the main menu is NOT allowed to access.
4) UPGRADE
Save the upgrade files obtained from your installer or distributor in a compatible USB flash drive, and insert it
into the USB port at the front panel. Then, click "SUBMIT" to start upgrading.
Note: Before using the USB flash drive, please use your PC to format the USB flash drive to FAT32 format
first. For the list of compatible USB flash drives, please refer to "APPENDIX 3 COMPATIBLE USB
FLASH DRIVE LIST" at page 62.
Note: After upgrading firmware, it's recommended to clear all HDD data for the system to work more
stably. Before clearing all HDD data, please remember to make video backup.
5) BACKUP CONFIG / RESTORE CONFIG
To keep the current configurations after DVR upgrade, insert a compatible USB flash drive into the USB port,
and select "SUBMIT" in "BACKUP CONFIG" to copy the current DVR configurations to a file "System.bin"
and save to your USB flash drive.
To restore the DVR configurations, insert the USB flash drive including "System.bin" to the USB port, and
select "SUBMIT" in "RESTORE CONFIG".
SYSTEM
LANGUAGE
ADMIN PASSWORD
OPERATOR PASSWORD
UPGRADE
BACKUP CONFIG
RESTORE CONFIG
17
ENGLISH
SETUP
SETUP
SUBMIT
SUBMIT
SUBMIT
MAIN MENU
will be shown
will be shown on