Geba Tronic Cody Universal Mini Manual De Instrucciones página 28

Transponder
Program 1
Teach-in of transponder keys
Put DIP of the
desired block *
(1/2/3) to ON
The transponder key is programmed to the desired block!
*Note:
Cody Universal mini
The keys are distributed among three blocks of 255 keys per color. The blocks correspond to the first
3 DIP switches.
If more than one key (of the same color only!) is taught-in, the DIP can remain in the ON position. The
successful teach-in of every key is confirmed by the illumination of the reader's LED. After the last key
has been taught-in, the DIP switch is reset to its initial position (OFF).
ATTENTION:
It is not possible to teach-in keys of different colors in one and the same block!
The reader should not be mounted directly on metal. Then use a spacer case (No. 508.000G.00).
Put the desired
key to the
reader
LED flashes
1x long
Set all DIP to
OFF