Connecting The Transmitter - Go groove BlueVIBE GTV Guia Del Usuario

Connecting the transmitter

The transmitter can be connected to any device with 3.5mm AUX or RCA audio output.
Plug the transmitter via 3.5mm AUX cable or 3.5mm AUX to RCA cable into your device's audio output
source. Make sure that you are connecting to the correct audio output ports typically labeled with words
such as AUDIO OUT, RCA OUT, ANALOG AUDIO OUT, OUTPUT or HEADPHONES. You will NOT get any sound
by connecting the transmitter to ports labeled AV1, AV2, or INPUT.
NOTE: You may need to connect directly to a cable box or media player to get sound.
Connect the headset by pressing and holding the headset power button for 3 seconds. When on, the
headset LED indicator will be blue.
To power off the headset, press and hold the power button for 3 seconds.
Depending on your device or audio output, volume settings may differ. If controllable, keep your output
volume at 90% on your device and adjust the headset using the volume buttons.
Use the mute button on the headset to turn off sound temporarily.
NOTE: You may need to adjust your television audio settings or plug the transmitter into an alternate
audio output to disable the TV's built-in speaker audio.
3.5mm
11
L
R
AUDIO
OUT
RCA