Moshi avanti air Manual Del Usuario página 2

• Bluetooth headphones • USB-C to USB charging cable
What's in the box
• Quick start guide • Carrying Case
Button Functions
Power On Click and hold for 2 seconds. (One long blue ash.)
Pairing Mode When power is OFF, click and hold for 4 seconds.
(A rapid blinking blue light indicates the headphone is in Pairing
Mode. Go to your device's Bluetooth Settings to pair.)
Power O Click and hold for 3 seconds. (One long red ash.)
*Note: to save battery life, your headphones will automatically turn
o after 10 minutes.
Charging
1. Locate the USB-C port and plug in the cable and connect the USB to a computer or wall charger.
2. It takes 2.5 hours to fully charge the earbuds. While charging, the indicator light is pulsing red and will
turn o once charging is complete.
Volume Up
Volume Down
Power / Pairing
USB-C
Charging Port
LED Indicator
Play / Pause / Answer Phone Call
Press once
Next track
Quickly press two times
Previous track
Quickly press three times
Voice Activation (Google Assistant and Siri)
Press and hold
QUICK START GUIDE
EN
Bluetooth Pairing for First Time
1. Press and hold the power button for 2 seconds. The blue light will ash once then switch to blinking
blue. This indicates it's in Pairing Mode.
2. Make sure your device's bluetooth is turned ON.
3. Look for the headphones in your Bluetooth Settings and connect.
If a password is required, type in "0000".
4. The blue light will stop blinking once your headphones are connected.
5. If you want to connect to a new device, turn o the headphones to restart the process. Click and
hold the power button for 4 seconds to turn OFF. Then turn ON and enter Pairing Mode again.
Moshi Bluetooth Audio App
Download our dedicated Moshi Bluetooth Audio App to use the added functions of your Moshi
earphones. Search for "Moshi Bluetooth Audio" on the app store to download.
Our DJ4two feature lets you stream and share* the music you're listening to with a friend who also
has a Moshi Bluetooth headset.
*Moshi Bluetooth Audio App required.