HELPFUL TIPS
NEVER leave the unit unattended while operating.
No power
•
Check if the Air Fryer is plugged in. If it is, check to see if the thermostat is open. If the
thermostat is open, it will be in restoration after cooling down. If the thermostat did not
open, please kindly check if the fuse is burnt. If the fuse is burnt, please change the fuse.
Fan is working, heating element is not
•
Check if the thermostat is adjusted to the specified temperature.
•
The heating element is broken, call a certified technician to repair.
CLEANING & MAINTENANCE
Please take care of your AIR FRYER by following these simple cleaning directions.
•
Clean the appliance after every use or in between a number of large batches.
•
The Grid and the Base Tray have a non-stick coating. Do not use metal utensils
or harsh abrasives when cleaning as this can damage the coating.
•
Unplug the appliance and make sure it cools completely.
•
Use a damp cloth to wipe the outside of the appliance.
•
Clean the Grid and inside components with a nonabrasive
sponge, hot water, and mild detergent.
•
Note: If using the dishwasher for the Base Tray, and Grid,
it is recommended to use top rack only.
•
Tip: If there is residual food in the Base Tray and Grid, add some hot water
and let it soak separately for about 10 minutes for easier cleaning.
•
Clean the inside of the appliance with a nonabrasive sponge and hot water.
•
Once cooled completely, clean the Grid, and Base Tray with a
soft cleaning brush to remove any lingering food.
STORAGE
•
Unplug the appliance and let it cool down completely.
•
Make sure that all the parts are cleaned and dry.
•
Push the power cord into the storing capsule. Affix the
cord by inserting it into the back of the unit.
IMPORTANT: Do not immerse unit in water or attempt to cycle through dishwasher.
8