KLIM TEMPEST Manual Del Usuario página 4

Operating the cooler
Connect the laptop cooler to your computer using the supplied
USB cable.
Automatic mode
Press the ON/M button to turn on the KLIM Tempest. The device
enters Automatic Mode (AT) by default. In this mode, it
automatically detects the air temperature coming off your
computer and adjust the fan speed automatically. The cooler
switches off when temperature is lower than 35 °C and works at
full capacity when it reaches 50 °C.
Note: press and hold the ON/M button to switch the display
mode between Fahrenheit and Celsius.
Manual mode
Press the ON/M button while in Automatic Mode to switch to
Manual Mode (MT). The default fan speed is 7 (out of 13 levels).
Press the + / - buttons to adjust the fan speed. The LCD display
briefly shows the speed level while adjusting it.
Hint: adjust the fan speed to find the perfect balance between
noise and cooling.
Shutdown
Press the ON/M button while in Manual mode to switch off the
cooler.
Troubleshooting & Contact
If you ever encounter any problems with the laptop cooler,
remember that your product is covered by our warranty. We
also remain at your disposal to help you with any issues.
Do not hesitate to contact us at support@klimtechnologies.com
for additional support.
Q: The device makes too much noise
A: This can be normal in cases of excessive temperature (where
the fan is spinning at maximum speed). If you hear any rattling
sounds, a foreign object may have been lodged inside the
product. Please contact us so we can help you solve this issue.
3