Cleaning Instructions; Cleaning The Cover - Kiddy protect Instrucciones De Operación

Fig 1: After you have made sure that the shoulder straps are set to the
right height (see 5.1), pull both shoulder straps over your baby's
shoulders.
Fig 2: Bring the ends of the shoulder straps together in the belt's lock.
The lock is engaged when you hear a clear "click". If the shoul-
der straps are too short, please proceed as described in Fig. 5.
Fig 3: Check to make sure your baby is securely buckled in by simulta-
neously pulling on both shoulder straps and on the strap's lock.
Fig 4: Tense the strap's lock by pulling on the central strap adjuster.
The strap system should lie as close as possible to the body of
your baby without pinching him or her. Please be extra sure to
check the tightness of the straps with thick clothing (in winter).
Fig 5: The shoulder straps can be loosened once again by pressing the
central belt adjuster ("Press" button highlighted in red) and simul-
taneously pulling the shoulder straps.
To remove your baby, simply open the lock and remove your
baby from your kiddy.
When you lay the shoulder straps over the back of the baby seat,
they will not be in your way when you put your baby back in your
kiddy.

6. Cleaning instructions

6.1 Cleaning the seat cover
The cover can be washed at 30 degrees with a washing machine set to the
gentle or delicate cycle. Do not use the spinning mode and do not dry in a
dryer.
12
ENG