Dunlop NET100_097D Instrucciones De Armado página 4

FIG. 5
Top Guide
Rope
5. NET SET UP
Stretch the assembled Net and poles across the playing area until the Net is taut. Press the Pole Anchors into
the ground with the poles touching the ground. Slip the poles onto the anchors. Holding the poles in the vertical
position, press the Guide Rope stakes into the ground at a 45º angle, 3 feet to 5 feet from the pole and 3 feet to
5 feet apart. Make sure that the hooks on the stakes are facing away from the poles.
X 4
9
TIP: After the net is completely assembled and the
pole tension is correct, the net can be tightened by
adjusting the tension clips up or down along the
top cable.
FIG. 6A
6. BOTTOM GUIDE ROPE SET UP
Make the loops on the Bottom Guide Rope tension clips large enough to slip over the stakes already in the ground.
Make sure that the Guide Rope loops are placed under the stake hooks as shown in FIG. 6
NET100_097D
TIP: After the net is assembled, you can adjust the
pole tension by sliding the tension clips up or down
along the guide ropes.
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
Bottom Guide Rope
15
16
17
18
19
20
21
22
23
24
25
FIG. 6
Top Guide
Rope
9
Bottom
Guide Rope
VOLLEYBALL SET
ASSEMBLY INSTRUCTIONS
MODEL : NET100_097D
Tension
Clip
4
Tension
Clip
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
www.themdsports.com