User Interface - Ovislink AirLive HP-2000E Manual Del Usuario

User Interface

Main Tab
The Main screen provides a list of all powerline devices logically onnected
to the computer when the utility is running.
The top panel shows all local HomePlug devices connected to the
computer's NIC (Network Interface Card). In most cases, only one device will
be seen. In situations where there are more than one local device being
connected, such as a USB or an Ethernet adapter, the user can select the
local device by clicking on it and then click the Connect button to its right.
The status area above the button indicates that your PC is connected to that
same device.
Once connected to the local device, the utility will automatically scan the
power line periodically for any other HomePlug devices. If no local HomePlug
devices are discovered, the status area above the connect button will indicate
with a message 'NO HOMEPLUG ADAPTERS DETECTED'.
Figure 4 illustrates the presence of two local devices connected locally to the
computer.
85Mbps Powerline Ethernet
HP2000E
Figure 4: Multiple Local Device Connection
English
3
3