Introduction; How To Operate - Nostalgia Products LIVING EWC024DZSS Instrucciones

INTRODUCTION

Thank you for purchasing the 24-BOTTLE DUAL ZONE ELECTRIC WINE COOLER.
This sleek, modern appliance keeps your bottles cool and on display, yet is
discreet enough in look and in sound to be a classic addition to any interior.
FEATURES
• 68L of storage for loading up to 24 bottles of red or white wine
• Dual zone cooling
• Slide-out chrome shelves
• Blue interior lighting, with on/off switch
• Blue LED display with touch keys
• Double-pane door with stainless steel handle
• Temperature range of 51° to 64° F (11°C to 18°C)
• Auto-defrost
• No compressor, no vibration means low-to-no noise
and bottle-sediment is not disturbed
• Eco-friendly: no refrigerant needed
• Adjustable level foot

HOW TO OPERATE

NOTE: This appliance is for indoor use only. Appliance is not
recommended for use in a garage or basement.
Before first use, clean your 24-BOTTLE DUAL ZONE ELECTRIC WINE COOLER
by removing the shelves and rinsing the cabinet with soda water, then rinsing
with clean water. Use a slightly damp, non-abrasive sponge, towel or cloth
to wipe down the inside and outside of the Main Unit, then wipe with a non-
abrasive towel to dry. Wipe down shelves and put back in place.
1. After cleaning, find a flat surface near an electrical outlet that is away from direct sunlight,
all sources of heat, and any water source. Allow unit to stand upright for approximately
2 hours before connecting to the power source. This will reduce the possibility of a
malfunction in the cooling system from handling during transportation. CAUTION:
Please keep appliance away from flammable substances, which can cause ignition.
2. Plug unit in, then locate the temperature arrow key buttons on each cabinet
door. The temperature is pre-adjusted to be within the range of 51° to 64°F (11°C
to 18°C) for each cabinet. To change this preset, use the up and down arrows.
To change from Fahrenheit to Celsius, press both arrows at the same time.
NOTE: Unit operates best when ambient temperature is around mid-70°F.
3. Once the unit is plugged in, the cooling system will begin to work. When the
interior temperature reaches your selected preset point, the cooling system
will go into half-power mode to keep the temperature constant.
5