Installation Instructions - Allen + Roth SUMTER 21-B461H-BN-AR Manual De Usuario

INSTALLATION INSTRUCTIONS

1.
Shut off the water at the supply valves under the sink or at the main water
supply. Disconnect the supply lines. Remove the existing faucet from the
sink.
Clean and dry the surface area where the new faucet will be mounted.
2.
To install with the optional deckplate for a 3-hole sink, skip to Step 3.
Insert the water supply inlets (2.1) and mounting bolt (2.2) on the faucet body (A)
through the mounting hole in the sink (2.3). Skip to Step 4.
3.
OPTIONAL DECKPLATE INSTALLATION:
Apply a thin bead of silicone to the gasket (E). Place the gasket (E) and
deckplate (D) over the mounting holes in the sink, aligning the center hole
in the gasket (E) and deckplate (D) with the center mounting hole in the sink
(3.1). Insert the water supply inlets and mounting bolt (3.2) on the faucet body (A)
through the hole in the deckplate (D) and the mounting hole in the sink (3.1)
until the faucet sits on top of the deckplate (D).
4.
From underneath the sink, secure the faucet body (A) to the sink using the
metal washer (AA) and lock nut (BB). Tighten the lock nut (BB) with the
wrench (CC) provided.
Hardware used
AA
Washer
BB
Mounting nut
CC Wrench
5.
Remove the bottom gasket (5.1) and mounting nut (5.2) from the drain
assembly (B). Push the bottom gasket (5.1) down onto the top of the
mounting nut (5.2) and twist to attach together.
x 1
x 1
x 1
4
1
2
2.1
3
3.2
3.1
4
AA
BB
CC
5
5.3
A
2.2
2.3
A
D
E
A
B
5.1
5.2