10. Refit the bracket fitting the bottom hinge pin. Replace both adjustable feet. Transfer the lower door
to the property position.
11. Make the middle hinge reverse the direction 180 then
transfer it to the left property position. Make the middle hinge
pin in the upper hole of the lower door, then tight the bolts.
12. Place the upper door back on. Ensure the door is aligned horizontally and vertically so that the seal
are closed on all sides before finally tightening the top hinge. Then inert the top hinge and screw it to
the top of unit and then fix hinge cover (in accessary bag) by screw.
13. Place the top left cover to right side and fix it by screw.
º,
11