If the digital and analog clock becomes un-synchronized
by accident, follow the steps below to restore the
syncronization:
.
Press and hold
5 seconds. The display will light up and the hours
will blink on the display.
.
Turn the jog wheel to set the hours so that they
match the analog clock and press the jog wheel
button to confirm. The minutes will blink on the
display.
3.
Turn the jog wheel to set the minutes so that they
match the analog clock and press the jog wheel
button to confirm.
4.
The clock is now prepared for either automatic or
manual time setting.
English
Troubleshooting
and the alarm switch (snooze) for