Front Panel; Side Panel; Ac Power Input - ION iCD04FX Manual De Inicio Rápido Del Usuario

BATTERY COMPARTMENT: load 6 "D" "UM1" batteries for use without AC power input.

FRONT PANEL

1. LINE OUTPUT: This output is for connecting an external audio system such as a PA speaker
system, powered monitors, or a home stereo. When a device is attached, the internal
speakers will shut off automatically. The level of the master stereo output signal is controlled
by the master fader.
2. MIC INPUT: Plug a 1/4" connector style Microphone in here.
3. POWER: Use this switch to turn on the unit. Turn the unit on before you turn on external
audio devices, and turn off external audio devices before you turn off the unit.
4. Headphone Jacks: Used to connect either 1/8" or 1/4" plugs for listening with headphones.

SIDE PANEL

5. AC POWER INPUT: This unit is designed to work with the power supply cord that comes with
the unit. While the power is switched off, plug the power supply into the unit first, then plug it
into the outlet. Leave this unplugged for battery operation.
VOLUME/MIXER CONTROLS
6. INPUT SELECTOR: Selects which source will go to Channel 1 (CD or FM tuner).
7. CHANNEL FADER: Controls the channel volume level.
8. CROSSFADER: Cleanly fades between the two input channels. "Hard left" selects Channel 1.
"Hard right" selects Channel 2. With the crossfader centered, both assigned channels are live.
Use the crossfader for fast and seamless fades from one selected channel to the other
9. MIC VOLUME: Adjusts the microphone level.
10. MASTER VOLUME: Controls the overall output level.
11. STEREO EQ: Adjusts the treble and bass of the master output.
12. CHANNEL CUE SELECTOR: Used to route channel audio to your headphones.
13. CUE (HEADPHONE) VOLUME: Adjusts volume for headphones. (NOTE: Be sure the volume
control is set to the OFF position before plugging in any headphones to avoid permanent
hearing damage.)
EFFECT FEATURES
14. EFFECT SELECT: Use this knob to select the desired effect. These include DJ effects like
scratching, filters, flangers (to create that "jet wash" sound), pan, and vocoder.
15. EFFECT WHEEL: Use this wheel to control the effect.
16. EFFECT WHEEL MODE: Use this switch set wheel mode (RETURN allows the effect to
automatically stop when the wheel stops – HOLD keeps the effect on until the switch is moved
to RETURN).
CD PLAYER FEATURES
17. CD DOOR: Press down on the door to load or remove the CD. Each press will open or close
the door.
18. TIME: Switches the time display between elapsed track time, remaining track time, and
remaining time on the entire CD.