Within The House (Example Without Wall Duct) - Funkwerk Active antenna Manual De Instrucciones

Permanent Mounting
Slip the protection cap over the HF contact of the connector as protection
against soilage for possible wall ducts and when laying the cable!
Now plan the laying of the coaxial cable.
Within the house
Lay the cable to the place where you want to set up the mounting  for the UMTS
data stick. Note that a bend radius of 20 mm may not be undercut.
Strip the protection cap carefully from the coaxial line.
Pus the coupler casing  over the HF contact [A] at the end of the coaxial line and
press the magenta catch element tight [B].
Connect the coaxial line with the connection provided for the UMTS stick on the
mounting . The connector of the coaxial line catches audibly.
(example without wall duct)
A
B
Connect the power supply unit  with the mounting 
again.
The LED on the mounting  of the UMTS stick lights up
when power is supplied to the antenna and shows you
that the device is ready for operation.
You can now insert the UMTS stick of your mobile radio
provider into the mounting  and operate it via a USB
extension cable [not included in the supplies] to your
terminal device [PC, notebook].
26