Garden Wood Furniture 4302KFBA Manual De Instrucciones página 3

Fig. 1
Left Leg Assembly
The smaller hole
faces in. The larger
counter-sunk
hole faces out.
The narrow inside face
of the Left Front Leg (C)
has two small pilot holes
near the top edge.
Right Leg Assembly
The Right Leg Assembly
mirrors the Left Leg Assembly.
NOTE: To make this assembly easier, use a variable speed drill and the provided Straight Hex
Wrench (U) instead of the Bent Hex Wrench (R) to attach the hex bolts.
1. Lay out the left and right leg pieces in their correct positions, taking special note of the angles of the
tops of the legs and where the holes appear on the front and back legs. See Figures 1 and 1a.
Insert the Metal Dowels (T) in the Short Side Stretcher (H), Medium Side Stretcher (I) and
Long Side Stretcher (G) into the Left Back Leg (A). Using the provided hex wrench of your choice
(R or U), attach with three 7x70mm Hex Screws (V). Repeat to attach the Left Front Leg (C).
See Figure 1.
2. Repeat the step for the Right Leg assembly. See Figure 1a.
4302KFBA Eden A-Frame
Assembly Instructions
Tools Included: Bent Hex Wrench; Straight Hex Wrench
Optional Tool: Variable Speed Drill
A
V
H
V
C
Fig. 1a
V
G
I
V
B
V
H
V
D
V
Note the large hole
and three smaller holes
in the narrow inside face
at the bottom of the Left
Back Leg (A).
V
G
I
V
Page 3 – 4302KFBA – 01/10
x 12