GYS SMART LIGHT MODULE Manual Del Usuario página 8

Translation of the original instructions
FAULT IDENTIFICATION
Problem
LED off
Buzzer not working
INSTALLING THE SMC CONNECTOR LOCKING SCREWS
To ensure a good connection of the SMC cable between the SLM and the host product, it is recommended to fit the
supplied screws and spring washers on the SMC connectors in accordance with the assembly below:
Screw
VELCRO FASTENING
The black Velcro straps can be glued under the mounting plates of the SLM in order to fix it easily.
WARRANTY
The warranty covers faulty workmanship for 2 years from the date of purchase (parts and labour).
The warranty does not cover:
• Transit damage.
• Normal wear of parts (eg. : cables, clamps, etc..).
• Damages due to misuse (power supply error, dropping of equipment, disassembling).
• Environment related failures (pollution, rust, dust).
In case of failure, return the unit to your distributor together with:
- The proof of purchase (receipt etc ...)
- A description of the fault reported
8
SMART LIGHT MODULE
Meaning
SMC connection cable badly connec-
ted or damaged
Electronic problem on the card
SMC connection cable badly connec-
ted or damaged
Electronic problem on the card
Grower
Washers
SMC
Solution
Check the connection and condition
of the SMC connecting cable
Contact your distributor
Check the connection and condition
of the SMC connecting cable
Contact your distributor
EN