Descargar Imprimir esta página

Electromagnetic Compatibility (Emc) - Axis M1004-W Guia De Instalacion

Publicidad

Legal Considerations
Video surveillance can be regulated by laws that vary
from country to country. Check the laws in your
local region before using this product for surveillance
purposes.
This product includes one (1) H.264 decoder license.
To purchase further licenses, contact your reseller.
Liability
Every care has been taken in the preparation of this
document. Please inform your local Axis office of
any inaccuracies or omissions. Axis Communications
AB cannot be held responsible for any technical or
typographical errors and reserves the right to make
changes to the product and manuals without prior
notice. Axis Communications AB makes no warranty
of any kind with regard to the material contained
within this document, including, but not limited to,
the implied warranties of merchantability and fitness
for a particular purpose. Axis Communications AB
shall not be liable nor responsible for incidental
or consequential damages in connection with the
furnishing, performance or use of this material. This
product is only to be used for its intended purpose.
Intellectual Property Rights
Axis AB has intellectual property rights relating to
technology embodied in the product described in this
document. In particular, and without limitation, these
intellectual property rights may include one or more
of the patents listed at www.axis.com/patent.htm and
one or more additional patents or pending patent
applications in the US and other countries.
This product contains licensed third-party software.
See the menu item "About" in the product's user
interface for more information.
This product contains source code copyright
Apple Computer, Inc., under the terms
of Apple Public Source License 2.0 (see
www.opensource.apple.com/apsl). The source code is
available from https://developer.apple.com/bonjour/
Equipment Modifications
This equipment must be installed and used in
strict accordance with the instructions given in
the user documentation. This equipment contains
no user-serviceable components. Unauthorized
equipment changes or modifications will invalidate
all applicable regulatory certifications and approvals.
Trademark Acknowledgments
AXIS COMMUNICATIONS, AXIS, ETRAX, ARTPEC
and VAPIX are registered trademarks or trademark
applications of Axis AB in various jurisdictions. All
other company names and products are trademarks or
registered trademarks of their respective companies.
Apple, Boa, Apache, Bonjour, Ethernet, Internet
Explorer, Linux, Microsoft, Mozilla, Real, SMPTE,
QuickTime, UNIX, Windows, Windows Vista and
WWW are registered trademarks of the respective
holders. Java and all Java-based trademarks and
logos are trademarks or registered trademarks of
Oracle and/or its affiliates. UPnP
TM
mark of the UPnP
Implementers Corporation.
WPA, WPA2 and Wi-Fi Protected Setup are marks of
the Wi-Fi Alliance.
Regulatory Information
Europe
with the applicable CE marking directives and
harmonized standards:

Electromagnetic Compatibility (EMC)

Directive 2004/108/EC. See Electromagnetic
Compatibility (EMC) on page 2 .
Radio and Telecommunications Terminal
Equipment (R & TTE) Directive 1999/5/EC. See
Radio Transmission on page 3 .
Low Voltage (LVD) Directive 2006/95/EC. See
Safety on page 4 .
Restrictions of Hazardous Substances (RoHS)
Directive 2011/65/EU. See Disposal and
Recycling on page 4 .
A copy of the original declaration of conformity
may be obtained from Axis Communications AB. See
Contact Information on page 5 .
Electromagnetic Compatibility (EMC)
This equipment has been designed and tested to fulfill
applicable standards for:
Radio frequency emission when installed
according to the instructions and used in its
intended environment.
Immunity to electrical and electromagnetic
phenomena when installed according to
the instructions and used in its intended
environment.
USA
This equipment has been tested using a shielded
network cable (STP) and found to comply with the
limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in
a residential installation. This equipment generates,
uses and can radiate radio frequency energy and,
if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference
to radio or television reception, which can be
determined by turning the equipment off and on, the
user is encouraged to try to correct the interference
by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment
and receiver.
Connect the equipment into an outlet on a
circuit different from that to which the receiver
is connected.
TM
is a certification
This product complies

Publicidad

loading