Attaching/Removing Devices - JVC GV-LS2WE Guia Basica Del Usuario

Attaching/Removing Devices

Attaching the Pantilter
The supplied pantilter allows you to pan (move horizontally) and tilt (move vertically)
the camera using your computer or smartphone.
1 Push the camera straight down.
Direction (Front)
• Remove all cables before attaching the pantilter.
• Check the position of the hole on the bottom side when attaching the pantilter.
• Attach the pantilter firmly so as not to leave a gap.
• Hold the pantilter (not the camera) when carrying the unit.
• When using the pantilter, connect the AC adapter, AV cord, and external mic to the
pantilter.
• The pantilter does not work properly when placed on a slant, upside down or on its
side.
Inserting/Removing an SD card
Insert a commercially available SD card before recording.
● Inserting
Insert the card straight with the terminal
facing to the right.
• Turn off the power before inserting/removing the SD card.
• Make sure that the write protect switch of the SD card is not set to LOCK (writing
protected).
• Some cards need to be formatted with this unit. For details, refer to the "Detailed
User Guide".
For more details, refer to the Detailed User Guide at http://manual3.jvckenwood.com/
2 Screw and fix the camera.
M IC
PLU
G IN
PO WE
R AV
EX TE
ND
● Removing
Push the card in once, and pull it out
straight.
DC
11