TOPVISION SL01 Manual Del Usuario página 11

Setting "PCM" on your TV
When all cables are connected properly, and LED indicator lights properly, if
there is no sound from tv or Soundbar, please setting your tv as below:
1. Press "Menu" on the tv's remote control
2. Press the arrow keys on the remote to scroll to "Audio Settings".
3. Press"OK" on the remote control.
4. Scroll to "Advanced Audio" and press "OK." Some televisions may not have
an "Advanced Audio" menu and may list various audio settings instead.
5. Scroll to "Audio Output Mode" or "Digital Audio Output Mode" and press
"OK".
6. Scroll until "PCM" is displayed as the current audio output.
7. Press "OK" to save the settings.
Note:
Some brand TVs maybe different in Digital Audio Output Settings, please
check your TV's manual.
Some TVs do not have output function, only input, then audio cannot be
connected.
Troubleshooting
Why is the unit not turning on?
Please check and make sure the power cord is
correctly connected to a power source.
Why the remote control does not work?
Replace with new batteries.
Why there is no sound in the soundbar?
Please make sure that the TV has an audio
output interface.
Check to make sure the audio cable is
correctly connected.
Make sure there is no other audio port input on your device.
Why the sound is distorted?
Adjust to the corresponding music, movie, news mode according to the specific scene.
Why does the sound bar reach its maximum volume when it is turned on?
Lower the volume of the audio source device
before turning on the sound bar.
Reconnect the power cord.
Aim the remote control at the LED light on the main unit.
Press the Mute button to switch on the sound.
When using optical, coaxial, and HDMI connections, please
set the TV to digital audio output and select PCM output.
Make the soundbar not connected to any audio
source device, decrease the volume via the remote control.