Sinji Smart Health Bracelet Manual página 6

EN
prompted, please allow the app access to your
phonebook, pictures, and music.
3.4 Operating the Sinji Smart Health bracelet
Turn on the Sinji Smart heart rate band by pressing the
main key for 5 seconds, the screen will light up when
ready. The length of press required to turn on the band
can be changed in the Flagfit application.
Turn the band back off by pressing the main key for 5
seconds, selecting "off", and pressing the main key for
5 seconds once again.
3.5 Pairing the Sinji Smart heart rate band to your phone
• Make sure the band is fully charged before first use
• Make sure bluetooth is enabled on your mobile device
• Press the main key of the watch for a few seconds to
turn the band on.
• Go to the Flagfit app
• Pull down on the white portion of the screen. Your
mobile device will start searching for any nearby
Smart bands
Please note: The band can only be connected to one
device at a time. Before pairing to your phone, make
sure it is disconnected from all other devices.
6