Important - Larzep B10044 Manual De Instrucciones De Uso Y Mantenimimento

S E C T I O N 2
TECHNICAL CHARACTERISTICS OF THE HYDRAULIC TROLLEY JACK
TYPE CAPACITY ON THE PLATE
B10044 10
SUMMARY: A = MIN. HEIGHT – B= MAX HEIGHT – C=MAN LENGTH – D= MAX WIDHT – E= MIN. HEIGHT OF FRAME
S E C T I O N 3
DESIGNED CHARACTERISTICS AND USE OF THE JACK.
Hydraulic trolley jack for lifting of stated capacity loads. Solid and strong structure fitted with four wheels: two fixed and two
swivel. Guarantees stability in all the operating positions.
While being designed mainly for the lifting of loads such as cars, and small vans and trucks, the jack can be employed for lifting
any other kind of load within the rated capacity of the jack.
WARNING: in case of lifting hazardous goods (explosive materials, chemical-toxic substances etc.) it is necessary to take proper
precautionary measures according to the kind of goods lifted.
IMPORTANT: the jack is designed for the lifting of loads and not for continued support, for which you have to use the correct
supporting stands.
The hydraulic trolley jack is designed for use in normal conditions of temperature and humidity. In situation with exceptional
temperatures, above or below 50° degrees centigrade from zero, the jack may show some failure due to the altered viscosity of
the hydraulic oil.
S E C T I O N 4
MOVEMENT, TRANSPORT AND PACKING.
The jack is shipped together with all its accessories (plate and handle) and packed in plastic bubble wrap. The packing material
can be recycled. The handle is removable.
S E C T I O N 5
ASSEMBLING AND DISASSEMBLING OF THE JACK.
The hydraulic trolley jack does not need any assembling or additional hydraulic oil, as it is ready for use.
Before using it, it is necessary to adhere to the instruction and warnings specified in the following section (no.6).
S E C T I O N 6
PREPARATION OF THE JACK FOR PUTTING IN TO SERVICE.
Before operating the hydraulic trolley jack, it is necessary to check that it is complete, and does not show any evidence of
damage. It is particularly necessary to check that the handle fits correctly in its correct position.
It is also necessary to check that the handle is straight and that no other components and parts of the jack have been damaged.
S E C T I O N 7
PUTTING INTO SERVICE AND USE OF THE JACK
1) Remove the jack from its package. The packing material can be recycled. Check also that no components have been
damaged.
2) Insert the handle in its correct position, and fix with screws.
3) Test the jack lifting first without a load, then with the plate in the middle of the load.
IMPORTANT: This easy operation must be done every time in order to have a safe and correct lifting position.
4) Use the central pedal for a quick approach of the lifting arm to the load, and put the plate in a secure position (in the
middle), then start pumping with the handle.
WARNING: NEVER use the foot pedal for lifting. The pedal is only to make a quick approach and NOT for lifting.
5) To release the jack, push the side pedal.
IMPORTANT: DO NOT OVERLOAD THE JACK. OVERLOAD CAN CAUSE DAMAGE OR FAILURE TO THE JACK.
S E C T I O N 8
CLEANING OF THE JACK
The jack must be kept clean and lubricated. Once a month clean it with proper unoxidized detergent.
WARNING: Never use water to clean the jack. Most of its component are made from steel and can oxidize.
VEHICLE CAPACITY A
15 160
B C D E
600 1740 400 265
WEIGHT KG.
120