Assembly With One Sleeve - WillowWood One Manual De Instrucciones

ASSEMBLY WITH ONE SLEEVE

1. Locate anterior on the One Sleeve.
2. For ease of assembly, mist the outside of the flexible
socket and the inside of the sleeve with alcohol.
3. While the flexible socket and sleeve are still
damp, slide the sleeve onto the flexible socket:
• The larger end of the sleeve should be toward
the top, and the smaller end with the sealing
fins should be toward the bottom.
• The distal edge of the sleeve should be about
2" (5 cm) below the posterior trim line of the
socket.
4. Insert the flexible socket with the One Sleeve on
it into the laminated socket. Align the hole on
the flexible socket with the One Link hole on the
laminated socket. Lightly mist the One Sleeve
fins or the inside of the socket with alcohol if
necessary.
5. Insert the flange bolt through the flexible socket
and One Link hole.
Apply Loctite Threadlocker Blue 242
(or equivalent) to the flange bolt.
Large
end of
sleeve
2" (5 cm)
below
posterior
trim line
Hole in flexible socket lined up
with hole in laminated socket
15
Assembly
Anterior
of sleeve
Apply
Loctite