Special features
Water tank (Auto Water Fill) (applicable models only)
The Auto Water Fill function lets you enjoy cold brewed tea in your refrigerator.
To fill the water tank
CAUTION
Make sure the infuser fits in the water tank holder.
Untitled-7 61
01 Lid
02 Sealed mouth
01
03 Infuser
04 Body
02
03
04
1. Grasp a handle groove of the sealed
mouth, and then pull up to open the lid.
2. Put tea leaves or fruit to your taste into
the infuser.
NOTE
If you want to keep the infused water in its
initial concentration, turn the Auto Water
Fill function off.
3. Enable the Auto Water Fill function on
the main panel. Open the left door of
the fridge door, and then mount the
water tank onto the holder. Push it
straight in as shown in the illustration
on the left.
4. Close the door. The infuser will start to
fill with chilled water a short time later.
English 61
2019-04-09
4:50:27