Blade Screw - Cozy Breeze FT30-U2X El Manual Del Propietario

GRILLES ASSEMBLY
1. Unscrew the Screw on the front of the
motor. Figure 1
2. Place the Back Grille against the motor housing with handle facing up,
insert the two upper Buckles into the Buckle Holes, then slide them
down to the small hole with a little force.
Align the bottom buckle with the screw hole, then tighten the Screw to
secure the Back Grille to the motor . Figure 2 & Figure 2a.
3. Remove the plastic sleeve from
the motor shaft. Loosen the screw
at the back of the Fan Blade.
Figure 3
Buckles
Figure 2.

Blade screw

4
Buckle holes
Screw
Figure 1.
Figure 2a.
Front side
Figure 3.