O'Sullivan 409110 Manual Del Usuario página 7

4 4
J
BLACK 9/16" PAN HEAD SCREW
(5 used in this step)
Carefully turn your unit over onto its front edges. Unfold the BACK (D) and lay it over your unit.
Make equal margins along all four edges of the BACK (D). Push on opposite corners of your unit if needed to make it "square".
Fasten the BACK (D) to your unit using the NAILS (Q). The NAILS should be 5-1/2" apart, 1-1/2" from the corners, and 1/4" in from
the edges.
Fasten five FEET (J) to the BOTTOM (E). Use five BLACK 9/16" PAN HEAD SCREWS (O).
409110
Caution
Do not stand the unit upright without the
BACK fastened. The unit may collapse.
E
O
www.osullivanbysauder.com
D
Q
NAIL
(28 used in this step)
Page 7