Booster Function; Timer - SCHÖCK STIB64BKE Instrucciones De Uso

Booster function

The Booster function [ P ] grants a boost of power to the selected heating zone.
If this function is activated the heating zones work during 5 minutes with an ultra high power.
Booster is foreseen for example to heat up rapidly big quantities of water, like nuddles
•
Start up / Stop the booster function:
Action
Zone selection
Start up the Booster
Stop the Booster
Power management:
The cooking hob is equipped with a maximum of power. When the Booster function is activated,
and in order to not exceed the maximum power, the electronic system orders to reduce
automatically the Booster level of another heating zone. The display is blinking on [ 9 ] during a
few seconds and then shows the maximum of Power allowed :
Heating zone selected
[ P ] is displayed

Timer

The timer is able to be used simultaneous with all 4 heating zones and this with different time
settings (from 0 to 99 minutes) for each heating zone.
•
Setting and modification of the cooking time :
Example for 16 minutes at power 7 :
Action
Zone selection
Select the power level
Select « Timer »
Set the units
Valid the units
Set the tens
Valid the tens
The time is confirmed and the cooking starts.
•
To stop the cooking time:
Example for 13 minutes at power 7 :
Action
Zone selection
Select « Timer »
Deactivate the units
Valid the units
Deactivate the tens
Valid the tens
•
Automatic stop at the end of the cooking time:
As soon as the selected cooking time is finished the timer displays blinking [ 00 ] and a sound rings.
To stop the sound and the blinking it is enough to press the key [ 00 ].
Control panel
Press key [ 0 ] from the zone
Press key [ B ]
Slide on the "SLIDER"
The other heating zone:
[ 9 ] goes to [ 6 ] or [ 8 ] depending the type of zone
Control panel
Press display [ 0 ] selected
Slide on the "SLIDER" to [ 7 ]
Press display [ CL ]
Slide on the "SLIDER" to [ 6 ]
Press display [ 06 ]
Slide on the "SLIDER" to [ 1 ]
Press display [ 16 ]
Control panel
Press display [ 7 ] selected
Press key [ 13 ]
Slide on the "SLIDER" to [ 0 ]
Press display [ 10 ]
Slide on the "SLIDER" to [ 0 ]
Press display [ 00 ]
10
Display
[ 0 ] and control light on
[ P ]
[ 9 ] to [ 0 ]
(example: power level 9)
Display
[ 0 ] and control light on
[ 7 ]
[ 00 ]
[ 0 fixed ] [ 6 blinking ]
[ 0 blinking ] [ 6 fixed ]
[ 1 blinking ] [ 6 fixed ]
[ 16 ]
Display
[ 7 ] and control light on
[ 13 ]
[ 1 fixed ] [ 0 blinking ]
[ 1 blinking ] [ 0 fixed ]
[ 0 blinking ] [ 0 fixed ]
[ 00 ]