Style selections 2058NNMV Manual De Instrucciones página 5

ASSEMBLY INSTRUCTIONS
4. Fasten the top piece (A) to the top side panels (B)
with screws (BB), as shown.
Hardware Used
AA
Tube Cap
CC
Small Screw
5. Place unit against wall and mark the mounting
points on the wall through the holes the top
sides panels (B).
Hammer the wall anchors (EE) into wall, unless
mounting screws (DD) will go directly into a stud.
NOTE: Wall anchors (EE) should be oriented
with the flat side horizontal.
Place unit against wall, lining up the wall anchors
and holes in the top sides panels.
Complete mounting by tightening mounting
screws (DD) into wall anchors or studs,
as shown.
Hardware Used
Mounting Screw
DD
EE
Wall Anchor
IS02058-I
4
x 2
x 2
5
x 2
x 2
5
BB
A
B
wall mounting hole
EE
DD
B
CC