Congratulations on your selection of the
FusionMaster Mincer. This product allows
sausages. It comes with 2 mincer discs, one
larger holes for coarse mincing.
Read these instructions for use carefully
future reference.
The appliance is intended for indoor
household use only. Wash all the parts that
use (see cleaning section).
a s D F G J H
Use a low temperature programme on your dishwasher to
Ensure the suction foot's ring (L) is on the
.
Place the suction foot (K) on a clean and
hopper. The metal end is on the hopper's
front side.
pointing outwards. To ensure it's well
towards the screw.
discs (B) on to the hopper's front with the
as you feel resistance, turn an extra 90°
(or ¼ of a turn) and then stop turning.
FusionMaster Mincer
mincer disc.
NOTE: Please ensure that the food
The meat mincer is intended to mince
fat. Clean the food/meat and cut into size
the food. If necessary, you can use the
plunger (F) to help process the food. Do
food and this could damage your mincer.
There is a chance that the meat/food
operation: if this happens, turn the
force.
.
through the screw ring. Then, follow step
recommend using hog casings of
type 32-34.
sausage insert and control the squeezing
pressure while processing the food to
turning the sausage around its own axis
the processing or when all food was
processed. Knot the end to close the last
sausage.
Clean thoroughly all parts used in
processing the food immediately after use.
The FusionMaster Mincer is dishwasher
water and rinsing it under clear, running
contact with other metal, ceramic or glass
instruments as this would damage its cutting
edges.
suction foot to release water.
Use the plunger as a storage
compartment to store the following dried
elements: the cutting fan, the mincer disc
and the sausage insert.
foot to the countertop, the countertop
Both countertops and silicone disc (K)
damp cloth.
contact with the silicone disc of the suction
foot. Do not attempt to open the foot.
Do not operate or place any part of this
appliance on or near hot surfaces
If the product was used or left unused
for a while, ensure the foot suction is still
re-using it.
the mincer disc with larger holes.
tightening or the loosening of the screw
ring.
Cold food is easier to mince.
EN
FusionMaster Mincer
For their safety, do not allow children to
play with the product.
Be careful when handling the cutting fan;
the cutting edges are sharp.
other manufacturers or your guarantee
Guarantee
Limited Tupperware guarantee applies.
Do not use the FusionMaster Mincer without
any ingredients inside the hopper. This can
cause damages to your product and is not
The Tupperware guarantee protects the
FusionMaster Mincer against chipping,
non-commercial use for the lifetime of the
product. This guarantee does not include
or suction foot resulting from negligent use or
misuse of the product. Please contact your
Tupperware consultant for a replacement.
EN