Buchi I-300 Pro Manual De Instrucciones página 117

Büchi Labortechnik AG
Manual de instrucciones Interfaz I-300 Pro
Communication cable. RJ45, 5 m
Connection between vacuum controller/interface and recir-
culating chiller or vacuum controller/interface and vacuum
pump.
Cooling water valve. 24VAC
Valve opens cooling water feed during distillation. Meant to
be used with a vacuum controller/interface.
Fastening set. For VacuBox, incl. holder 2 pcs, tu-
be
Used to fasten VacuBox on the Vacuum Pump V-300 or
V-600.
Foam sensor. Incl. holder
Prevents sample from foaming into the condenser by aera-
tion of system temporarily. Meant to be used with the In-
terface I-300 / I-300 Pro.
Holder. To fix interface on lab stand
To fix Interface I-300 / I-300 Pro, VacuBox and LegacyBox on
lab stand, Rotavapor® R-21x or Vacuum Pump V-7xx. Incl.
support, fixing clamp.
Holder, set. To fix Interface and Woulff bottle on
lab stand
To fix Interface I-300 / I-300 Pro, VacuBox, LegacyBox and
Woulff bottle / valve unit on a lab stand, Rotavapor® R-21x
or Vacuum Pump V-7xx. Incl. holder for Interface and
Woulff bottle, 2 M4x8 screws.
Holder. Wall mount, incl. support set
To fasten Interface on wall.
LegacyBox. Incl. accessory kit
Interface between Interface I-300 / I-300 Pro (with Vacu-
Box) to peripherals of older generations (Vacuum Pump
V-7xx, Recirculating Chiller F-1xx).
Level sensor. Incl. O-ring, cable, rubber band
Prevents an overflow in the receiving flask of condenser/se-
condary condenser. Placed on receiving flask. Meant to be
used with the Interface I-300 / I-300 Pro.
Power adapter. 30 V, 30 W, frequency 50/60 Hz
To power vacuum controller directly or to power interface
via LegacyBox or VacuBox.
Stand. V stand with rod, 600 mm
Used as a holder for interface or vacuum controller when
they cannot be mounted on a peripheral or wall.
Accesorios | 11
N.º de pedido
11056240
031356
11062957
11061167
11059021
11065362
11059132
11061166
11060954
11060669
048891
Figura
117/120