Fromm FS400 Serie Manual Del Usuario página 4

FROMM
Installation FS4.0147.01IT-EN-FR-SP-DE-NL Version01
ENGLISH
With TOP already active
1. press the 2 keys together until the LED starts flashing more quickly;
2. then press the key to activate (the LED comes on);
3. within 10", place the active transmitter on its back and press the key to duplicate for a few
seconds.
After saving, the LED will flash 3 times and the transmitter will be ready for use. For another key,
repeat steps 1, 2 and 3.
→ For NEW SYSTEMS
st
Read the manual of the electric panel to save the 1 transmitter, then follow the above procedure to
duplicate it.
Check Also ELS.1030 - ELS.1031 Page 8
4
It is forbidden to duplicate this manual or parts of it in any way or any form without written permission of the author © 2006