Troubleshooting - weasy KFX32 Manual De Instrucciones

TROUBLE SHOOTING
Symptom
No water/no steam
No lipa
No steam
Coffee maker can not
work any more,hot
water & steam lamp are
on light,another two
lamps not on
Coffee more or less
The steam cannot froth.
ENVIRONMENT CAUTION:
Do not dispose of this product as it has with other household products. There is a
separation of this waste product into communities, you will need to inform your local
authorities about the places where you can return this product. In fact, electrical and
electronic products contain
hazardous substances that have harmful effects on the environment or human health and should be
recycled. The symbol here indicates that electrical and electronic equipment should be chosen
carefully, a wheeled waste container is marked with a cross.
Adeva SAS / H.Koenig Europe - 8 rue Marc Seguin - 77290 Mitry Mory - France
www.hkoenig.com - sav@hkoenig.com - contact@hkoenig.com - Tél : +33 1 64 67
Cause
1.Is there water inside it? or Is
water tank located well ?
2.The coffee maker is no water
in advance
3.Machine preheating is
unfinished
Coffee powder is too thick/not
flatten
The steam hole was blocked
Not closed steam knob
Coffee powder loading is too
much or less
Is it whole milk ?
The steam ready indicator is not
illuminated, then
frothing milk.
00 05
Corrections
Will be adding water into the water
tank, Switch on the power switch
and coffee switch
Change the coffee powder, with
pressure pressed powder coffee
powder
Use a small wire to poke the steam
holes
closed steam knob
1 cup 1 spoon with flatten
according to the standard amount
of filling, coffee powder can't be
too thick or too thin, too thick
coffee powder can not be
complete extraction, too fine affect
the quantity of coffee
Use whole milk.
Only
begins to indicator is illuminated, the steam
can be used to froth.
after the steam ready