PROZIS Vakk Manual Del Usuario página 4

EN
Before use
Make sure the appliance is fully charged before using it for the first time.
If the battery charge indicator is flashing, that means the appliance is charging.
When the light is on continuously, the appliance is fully charged.
How to charge
1 Connect the charging cable to the appliance.
2 Connect the other end of the cable to a USB charger or adapter.
3 When inside a car, insert the charger in the auxiliary power outlet. Turn the key in the ignition to enable power supply.
How to use
1 Push both handle buttons to rotate the handle.
2 Remove the protective cover before switching on the appliance.
3 Press the On/Off button to switch the appliance on and off.
Accessory installation
The 2-in-1 nozzle extension can be used in 2 ways:
1 With the brush pushed back, the extension can be used to vacuum corners or other hard-to-reach spaces.
2 With the brush pushed to the front, the extension can be used to vacuum soft surfaces.
6
Insert the extension into the nozzle as shown.
How to charge the battery separately
1 Press the battery release button.
2 Charge the battery according to the 'How to charge' instructions.
3 To reattach the battery, align the release button with the battery charge indicator and push. Proper placement will produce a 'click'
sound.
EN
7