Symmons Origins S-9606-PLR Instalación Y Manual De Funcionamiento Y Mantenimiento página 4

Installation
Note:
For valve body installation, please
see valve body manuals.
1) Attach secondary integrated diverter
handle (K) to shower escutcheon (J).
J
K
2) Install shower escutcheon (J) to
shower valve. Secure with two
screws (I).
J
I
3) Install diverter escutcheon (H) to
diverter valve. Secure with two
screws (G).
H
G
4) Install dome covers (F) to valves.
Turn clockwise to secure.
F
F
5) Install handles (D) to valves.
Secure with set screws (E).
D
E
D
E
Note: Handles should be facing the
6 o'clock position.
6) Install tub spout (L) to pipe fitting.
Turn clockwise to secure.
L
4
7) Attach shower arm (B) and
flange (C) to vertical shower pipe.
Turn clockwise to tighten.
B
8) Install showerhead (A) to shower
arm (B). Turn clockwise to tighten.
A
9) Remove slide bar ends (O1) from
slide bar flanges. Using flanges
as a guide, drill 1/8" pilot holes
2
into studs or wood blocking.
With slide bar (O) in position,
secure to wall using screws (N).
Attach slide bar ends (O1) to bar
flanges.
N
O1
Note: Slide bar must be secured
with at least two of the three
screws (N) at each end.
C
B
O