Installation - ETI GROW ELITE GL-250-MV Guía De Uso Y Cuidado

installation

Select a suitable location that can support the weight of the LED Grow Light. The light must be mounted a minimum of 8 inches from
adjacent lighting equipment and from materials including, but not limited to, walls, ceilings, movable partitions, and other combustible
materials.
nOte: When determining the desired location for suspension mounting the light fixture, make sure the light fixture is located directly below
the electrical outlet and that the distance between the electrical outlet and the end of the light fixture is less than 10 ft.
nOte: Separate mounting hardware (not included) not shown to actual size.
For mounting to drywall:
Toggle bolt x 2
For mounting to wood:
Hook screw x 2
nOte: Eye hooks can be used as an alternate method of attaching the fixture to the ceiling.
1
Mounting to drywall
□ Drill two holes large enough to clear the closed flaps of
the butterfly nut on the toggle bolt (not included). Make
sure to fasten the toggle bolt into the butterfly nut before
inserting the flaps into the ceiling.
□ Tighten the toggle bolt.
Part description
Toggle Bolts Consisting of a No. 10-24 bolt 2-7/8 inches long with two
tapered wings 1 by 5/16 inch.
Studs Measuring 1-3/4 inches overall and having 1-1/4 inches of
wood screw threads on one end and at least six No. 10-24
machine screw threads on the other end.
Metal Hooks With a No. 10-24 threaded hole that engages the bolt threads.
4
2
Mounting to wood
□ Drill two 1/16 in. diameter holes in the ceiling to
accommodate hook screws (not included). Make sure to
fasten the combo wood-machine end into the metal hook.
□ Tighten the hook screw into the wood.
quantity
2
2
2