Warranty; Distributor's Address; General Information; Use Of This Manual - RIPEnergy HIPHOP pro Serie Manual De Usuario

33 Warranty

RIPEnergy is not manufacturer of these units. All technical information's, data's and dimensions rely on
information's given by the manufacturer. Therefore RIPEnergy AG is not responsible for the data's provided in this
manual. Should work take place, which is not in accordance with guidelines, local rules, instructions or
specification's, damage may occur. All of these matters will lead to loss of warranty. RIPEnergy AG can not
accept any liability for damages or costs arising due to the use of these inverters.

34 Distributor's address

RIPEnergy AG, Talstrasse 2, CH-8702 Zollikon, Schweiz
Tel : ++41-(0)43-818 53 85
Email: info@ripenergy.ch

35 General Information

Thank you for choosing a product supplied by RIPEnergy AG. The product you have bought is manufactured to
meet the highest quality standards. Our manufacturers have a very long experience in manufacturing of high end
electronic equipment.

36 Use of this manual

This user's manual contains the information you need to install and operate this inverter correctly. Check that you
have the correct manual for your unit.
It is valid for the following units:
Sine wave Inverter SWING pro
Sine wave Inverter SWING pro
Sine wave Inverter JAZZ pro
Sine wave Inverter JAZZ pro
Sine wave Inverter HIPHOP pro
Sine wave Inverter HIPHOP pro
Sine wave Inverter HIPHOP pro
Read the manual carefully before installing or operating the inverter. If you do not understand or are
uncertain about any operation or information, please contact your dealer. He will be able to help you
with an explanation or will demonstrate the operation.
The user must always have access to the user's manual. The latest version of the manual is
provided and can be downloaded from the homepage of RIPEnergy AG.
These inverters must be only installed by qualified, authorized and trained personnel familiar with
the locally applicable standards and taking into consideration all relevant safety guidelines and
measures!
Never remove the type number plate. Important technical information required for service or delivery
of spare parts can be derived from the type number plate.
Modifications without a written permission from RIPEnergy AG means that warranty is lost
immediately!
Always contact your dealer first if you have any problems.
Fax : ++41-(0)43-818 53 87
Internet: www.RIPEnergy.ch
200-12-230 und 200-24-230 und 200-48-230
350-12-230 und 350-24-230 und 350-48-230
700-12-230 und 700-24-230 und 700-48-230
1000-12-230 und 1000-24-230 und 1000-48-230
1500-12-230 und 1500-24-230 und 1500-48-230
2000-12-230 und 2000-24-230 und 2000-48-230
3000-24-230 und 3000-48-230
26/85 V 1.0