Diggro S2 Manual Del Usuario página 9

vibration is not supported. Long press this button, and you will
exit this function.
5.Vibration on/off:
interface for switching on or off vibration by long pressing this
button. By default, vibration is ON. When vibration is in OFF
state, the watch does not vibrate no matter what notification is
recei ved.
6. Palming screen - on : If you enable this function,the screen
of the watch will light up automatically when you
raise you wrist to help you view the time.
App Functions And Settings
1.Main interface
The main interface displays the data about step counting,
distance, and calories you have burned. The buttons on the
upper right corner of this interface allow you to synchronize
and share history data. By clicking the heart-shaped icon in
the center, you can perform a heart rate test. The APP will
measure and record your current heart rate data. Once the
detection at the APP end is finished, the heart rate
detection will stop automatically.
By clicking the Setting icon on the upper right corner, you can
set the heart rate warning (vibration) switch and the heart rate
warning threshold. Then, after you synchronize this setting
to the watch, the watch will vibrate and the heart rate value
measured will flash when the maximum heart rate is reached.
2.Trend
After synchronizing the history data, you can view the
exercise record of each day, each month and each year on
the daily records. You can also view the data about step
counting, distance, calories you have burned, and the
goal you have achieved.
After synchronizing the history data, you can also view the
data about your sleeping quality and the related history
This button allows you to enter the
- 7 -