oneConcept 10032234 Manual De Instrucciones página 12

EN
12
Assemble and Disassemble of the Dust Cup
To hold the dust cup with one of you hand, and hold the handle with another hand,
input and align the dust cup into the install position of the unit and assemble it in place
properly. Rotate the dust cup in the direction indicated by the dust cup till it locked.
Note: If the dust cup is not assembled properly, there will be dust leakage, week
suction or other poor performance.
If you need to remove the dust cup, rotate the dust cup with opposite direction, once to a
certain position, you can take off the dust cup directly.
Turn on the Vacuum Cleaner
Plug the power plug into the socket and make sure the
connection is secure. Press the switch button on the handle and
the vacuum cleaner starts working.