clair BF2025 Manual De Instrucciones página 5

Maintenance
How to clean the filter
1. Turn the power 2. Lay the product
off and unplug from down with back
power outlet. cover facing
upwards.
필터 교체 How to change the filter
1. Lay the product
down with back
cover facing up-
wards.
Caution for maintenance
12months
12개월
Filters last for a maximum of 12
months which is subject to change
depending on installation place and
environmental conditions.
Do not use water or detergent
when cleaning the body or filter.
It may cause stains or cracks on
the surface.
clair_ring 사용설명서(통합)_140829.indd 5
English Deutsch
3. Hold the handle
and disassemble
the back cover.
2. Hold the handle
and disassemble
the back cover.
Cleaning the filters with water is not Do not touch power cord with wet
recommended. It may decrease hands, for danger of electric shock
purification ability due to reduced or other accidents.
filter function.
Do not place any objects on the Keep children from climbing on
product. It may block the inlet and putting fingerers or other
or outlet causing malfunction or foreign matter in the outlet, as this
reduced ability of purification. could cause injury.
- 5 -
France Español
※Caution!
Make sure to start cleaning and
filter management after turning
off power, unplugging from
power outlet and making sure
4. Remove dust
that the fan has stopped.
at the top of the
e2f
filter using a There is danger for electric
vacuum cleaner.
shock or other accidents if filter
is changed during operation.
Do not pull on the cable of the
power plug. It may cause damage
to the cable or injury.
Be careful that water is not al-
lowed the inside product. It may
cause a fire or electric shock.
中文
3. Hold the handles
on both side of the
e2f
filter and disas-
e2f
semble the filter
from main body.
4. Change to a clean
unused filter.
2014-08-29 오후 4:56:35